Precision wire manufacturing
- Dig pickling of steel parts
- Continous pickling of wire and edge wire < 30 mm² cross-sectional area
- Vacuum- and protectivagas-glowing in pot- and hat furnaces
- Harden and temper of round- and edge dimensions (< 20 mm² cross-sectional area) in rings
- Drawing wire in size range 0,6 – 16 mm respectively edge dimensions
- Drawing wire to rod in size range 0,8 – 16 mm
- Rolling of edge dimendions until 40 mm² cross-sectional area from cross section area in round and edge
- Grinding rods in size range 4,5 – 30 mm
- Grinding and polishing rods in size range 2 – 30 mm
- Draw peeling (peeling) wire in size range 4,5 – 15 mm
- Judge and cutting wire to rods in size range 0,8 – 17 mm
- Removal cutting rods in size range 2 – 50 mm
- End cutting, plotting and/or chamfer rods in size range 4 – 13 mm with chamfer angle 30° or 45°
- Surface testing rods with eddy-current in size range 2 – 20mm
- Cross-section testing rods with ultrasound in size range 5 - 13,5 mm
Embodiment |
Size in mm |
Tolerance |
---|---|---|
Wire |
|
|
drawn |
Ø 0,6 - 16 |
>= 9 |
draw-shaved |
Ø 4,5 - 15 |
>= 11 |
edge- and profiledimensions drawn |
4 edge 1,5 - 8,0 |
>= 9
|
6 & 8 edge, 1,5 - 10,0 |
||
width 1,0 - 8,0 |
||
size 0,5 – 5,0 |
||
width: size = max. 6:1 |
||
edge- and profiledimensions rolled |
until 40 mm² cross-section |
>= 9 |
Bar |
||
drawn bars |
Ø 0,8 - 16 |
>= 9 |
grounded bars |
Ø 4,5 - 30 |
>= 7 |
grounded and polished bars |
Ø 2 - 30 |
>= 6 |
edge dimensions in bars |
4 edge 1,5 - 8,0 |
>= 9
|
6 & 8 edge 1,5 - 10,0 |
||
width 1,5 - 5,0 |
||
size 1,5 - 8,0 |
||
width: size = max. 6:1 |
||
flat bars |
Ø 0,8 - 17 |
|
end processing |
Ø 4 - 13, 30° or 45° |
|
detaching and cutting |
Ø 2 - 50 |
|
check |
eddy current Ø 2 - 20 ultrasonic Ø 5 - 13,5 |